création du projet

5 files changed, 215 insertions, 0 deletions

diff --git a/TwoStepsAuthenticator.TestWebsite/Properties/AssemblyInfo.cs b/TwoStepsAuthenticator.TestWebsite/Properties/AssemblyInfo.cs
new file mode 100644
index 0000000..b1e30d0
--- /dev/null
+++ b/TwoStepsAuthenticator.TestWebsite/Properties/AssemblyInfo.cs
@@ -0,0 +1,35 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("TwoStepsAuthenticator.TestWebsite")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("TwoStepsAuthenticator.TestWebsite")]
+[assembly: AssemblyCopyright("Copyright ©  2013")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible 
+// to COM components.  If you need to access a type in this assembly from 
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("1bef9786-7eb3-411d-8852-b4413ca2e71d")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/TwoStepsAuthenticator.TestWebsite/TwoStepsAuthenticator.TestWebsite.csproj b/TwoStepsAuthenticator.TestWebsite/TwoStepsAuthenticator.TestWebsite.csproj
new file mode 100644
index 0000000..2495e1e
--- /dev/null
+++ b/TwoStepsAuthenticator.TestWebsite/TwoStepsAuthenticator.TestWebsite.csproj
@@ -0,0 +1,105 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProductVersion>
+    </ProductVersion>
+    <SchemaVersion>2.0</SchemaVersion>
+    <ProjectGuid>{C61D3D65-5461-43E9-9E13-9DF85671ED27}</ProjectGuid>
+    <ProjectTypeGuids>{349c5851-65df-11da-9384-00065b846f21};{fae04ec0-301f-11d3-bf4b-00c04f79efbc}</ProjectTypeGuids>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>TwoStepsAuthenticator.TestWebsite</RootNamespace>
+    <AssemblyName>TwoStepsAuthenticator.TestWebsite</AssemblyName>
+    <TargetFrameworkVersion>v4.5</TargetFrameworkVersion>
+    <UseIISExpress>true</UseIISExpress>
+    <IISExpressSSLPort />
+    <IISExpressAnonymousAuthentication />
+    <IISExpressWindowsAuthentication />
+    <IISExpressUseClassicPipelineMode />
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Web.DynamicData" />
+    <Reference Include="System.Web.Entity" />
+    <Reference Include="System.Web.ApplicationServices" />
+    <Reference Include="System.ComponentModel.DataAnnotations" />
+    <Reference Include="System" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="System.Web.Extensions" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Drawing" />
+    <Reference Include="System.Web" />
+    <Reference Include="System.Xml" />
+    <Reference Include="System.Configuration" />
+    <Reference Include="System.Web.Services" />
+    <Reference Include="System.EnterpriseServices" />
+  </ItemGroup>
+  <ItemGroup>
+    <Content Include="Web.config" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="Properties\AssemblyInfo.cs" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="Web.Debug.config">
+      <DependentUpon>Web.config</DependentUpon>
+    </None>
+    <None Include="Web.Release.config">
+      <DependentUpon>Web.config</DependentUpon>
+    </None>
+  </ItemGroup>
+  <PropertyGroup>
+    <VisualStudioVersion Condition="'$(VisualStudioVersion)' == ''">10.0</VisualStudioVersion>
+    <VSToolsPath Condition="'$(VSToolsPath)' == ''">$(MSBuildExtensionsPath32)\Microsoft\VisualStudio\v$(VisualStudioVersion)</VSToolsPath>
+  </PropertyGroup>
+  <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" />
+  <Import Project="$(VSToolsPath)\WebApplications\Microsoft.WebApplication.targets" Condition="'$(VSToolsPath)' != ''" />
+  <Import Project="$(MSBuildExtensionsPath32)\Microsoft\VisualStudio\v10.0\WebApplications\Microsoft.WebApplication.targets" Condition="false" />
+  <ProjectExtensions>
+    <VisualStudio>
+      <FlavorProperties GUID="{349c5851-65df-11da-9384-00065b846f21}">
+        <WebProjectProperties>
+          <UseIIS>True</UseIIS>
+          <AutoAssignPort>True</AutoAssignPort>
+          <DevelopmentServerPort>0</DevelopmentServerPort>
+          <DevelopmentServerVPath>/</DevelopmentServerVPath>
+          <IISUrl>http://localhost:47412/</IISUrl>
+          <NTLMAuthentication>False</NTLMAuthentication>
+          <UseCustomServer>False</UseCustomServer>
+          <CustomServerUrl>
+          </CustomServerUrl>
+          <SaveServerSettingsInUserFile>False</SaveServerSettingsInUserFile>
+        </WebProjectProperties>
+      </FlavorProperties>
+    </VisualStudio>
+  </ProjectExtensions>
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+</Project>
\ No newline at end of file
diff --git a/TwoStepsAuthenticator.TestWebsite/Web.Debug.config b/TwoStepsAuthenticator.TestWebsite/Web.Debug.config
new file mode 100644
index 0000000..2e302f9
--- /dev/null
+++ b/TwoStepsAuthenticator.TestWebsite/Web.Debug.config
@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<!-- For more information on using web.config transformation visit http://go.microsoft.com/fwlink/?LinkId=125889 -->
+
+<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
+  <!--
+    In the example below, the "SetAttributes" transform will change the value of 
+    "connectionString" to use "ReleaseSQLServer" only when the "Match" locator 
+    finds an attribute "name" that has a value of "MyDB".
+    
+    <connectionStrings>
+      <add name="MyDB" 
+        connectionString="Data Source=ReleaseSQLServer;Initial Catalog=MyReleaseDB;Integrated Security=True" 
+        xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/>
+    </connectionStrings>
+  -->
+  <system.web>
+    <!--
+      In the example below, the "Replace" transform will replace the entire 
+      <customErrors> section of your web.config file.
+      Note that because there is only one customErrors section under the 
+      <system.web> node, there is no need to use the "xdt:Locator" attribute.
+      
+      <customErrors defaultRedirect="GenericError.htm"
+        mode="RemoteOnly" xdt:Transform="Replace">
+        <error statusCode="500" redirect="InternalError.htm"/>
+      </customErrors>
+    -->
+  </system.web>
+</configuration>
\ No newline at end of file
diff --git a/TwoStepsAuthenticator.TestWebsite/Web.Release.config b/TwoStepsAuthenticator.TestWebsite/Web.Release.config
new file mode 100644
index 0000000..c358444
--- /dev/null
+++ b/TwoStepsAuthenticator.TestWebsite/Web.Release.config
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<!-- For more information on using web.config transformation visit http://go.microsoft.com/fwlink/?LinkId=125889 -->
+
+<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
+  <!--
+    In the example below, the "SetAttributes" transform will change the value of 
+    "connectionString" to use "ReleaseSQLServer" only when the "Match" locator 
+    finds an attribute "name" that has a value of "MyDB".
+    
+    <connectionStrings>
+      <add name="MyDB" 
+        connectionString="Data Source=ReleaseSQLServer;Initial Catalog=MyReleaseDB;Integrated Security=True" 
+        xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/>
+    </connectionStrings>
+  -->
+  <system.web>
+    <compilation xdt:Transform="RemoveAttributes(debug)" />
+    <!--
+      In the example below, the "Replace" transform will replace the entire 
+      <customErrors> section of your web.config file.
+      Note that because there is only one customErrors section under the 
+      <system.web> node, there is no need to use the "xdt:Locator" attribute.
+      
+      <customErrors defaultRedirect="GenericError.htm"
+        mode="RemoteOnly" xdt:Transform="Replace">
+        <error statusCode="500" redirect="InternalError.htm"/>
+      </customErrors>
+    -->
+  </system.web>
+</configuration>
\ No newline at end of file
diff --git a/TwoStepsAuthenticator.TestWebsite/Web.config b/TwoStepsAuthenticator.TestWebsite/Web.config
new file mode 100644
index 0000000..6da78ec
--- /dev/null
+++ b/TwoStepsAuthenticator.TestWebsite/Web.config
@@ -0,0 +1,14 @@
+<?xml version="1.0"?>
+
+<!--
+  For more information on how to configure your ASP.NET application, please visit
+  http://go.microsoft.com/fwlink/?LinkId=169433
+  -->
+
+<configuration>
+    <system.web>
+      <compilation debug="true" targetFramework="4.5" />
+      <httpRuntime targetFramework="4.5" />
+    </system.web>
+
+</configuration>